CAUTION!!!!!!! When using the PCM-Guard, “ALWAYS DISCONNECT YOUR CHARGER”, before unplugging the PCM-Guard OR Battery. Please! stay safe and use these normal charging procedures as recommended by Poly-Quest: 1-Connect Battery with PQ-PCM-Guard and then connect to your charger. 2-Charge Li-Poly-Batteries as you would normally. 3-After charging, disconnect the PQ-PCM-Guard from the charger first, then disconnect PQ-PCM-Guard from PQ-Li-poly. 4-If you disconnect the charger while charging, never disconnect the Li-Poly batteries from PCM-Guard, this may cause a ‘voltage surge’ to the PCM. Please make sure to terminate the charging procedure and then disconnect all of the other connections. POLY-QUEST LITHIUM POLYMER BATTERIES (10C+) Pictured below is the new Poly-Quest 1100 mAh 11.1V pack of three cells connected in series. It is from the newest range of High-Output Lithium Polymer cells available from Shulman Aviation in a wide variety of capacities. All packs come with a separate multi-connector, which allows tapping into each cell individually, to check cell voltage and re-balance when necessary. All packs come as pictured, with high-quality silicone cabling sized appropriately for expected current draw.Poly-Quest Advances Safety Poly-Quest lithium-polymer, high-performance 10 -12C packs not only delivers the highest voltage and retained capacity in their class, but also sport the widest set of safety features on the market. The PCM-Guard (optional part) plugs into the multi-connector and regulates charge voltage PER CELL to a maximum of 4.2V, nearly eliminating the possibility of charge-related fires. Sonic welding to PCB board, 0.5 mm rubber sheath covering (shown in blue above), and shock pad caps on both top and bottom of the packs all make Poly-Quest the most rugged and crash-resistant available today.  Type  Volt Nom Capacity (mAh)  Standard Discharge Rate   Max Rate 10 sec Weight   Dimension (W x H x D)  mm  PQ-0600 2S  7.4V  600 mAh  10C  15C   26g 22*48*12   PQ-0600 3S  11.1V  600 mAh  10C   15C   38g  22*48*18  PQ-0880 2S  7.4V  880 mAh  10C   15C   39g  35*62*7.6  PQ-0880 3S  11.1V  880 mAh  10C   15C   56g  35*62&11.4  PQ-1000 2S  7.4V  1000 mAh  10C   15C   53g  35*62*10  PQ-1000 3S  11.1V  1000 mAh  10C   15C   77g  35*62*15  PQ-1500 2S  7.4V  1500 mAh  10C   15C   64g  42*69*9.8  PQ-1500 3S  11.1V  1500 mAh  10C   15C   100g  42*69*14.7  PQ-1800N 2S  7.4V  1800 mAh  10C   15C   84g  30*90*14.9  PQ-1800N 3S  11.1V  1800 mAh  10C   15C   126g  30*90*18  PQ-2200 2S  7.4V  2200 mAh  10C   15C   95g  56*90*8.0  PQ-2200 3S  11.1V  2200 mAh  10C   15C   138g  56*90*12  PQ-2600 2S  7.4V  2600 mAh  10C   15C   112g  56*90*9.2  PQ-2600 3S  11.1  2600 mAh  10C   15C   165g  56*90*13.8 Poly Quest Battery Capacity and Current: The rated capacity for each cell type is the minimum guaranteed by the manufacturer at “4C” discharge rates. Capacity is a measure of how much energy can be drawn from the battery before it is completely discharged. A 1000 mAh cell (1. Ah) can deliver 1 amp for one hour or more, for example. When connecting packs in parallel, capacity is multiplied, as in the "2P" example below - two packs wired in parallel. The ability of a cell to deliver current, or amperage (A), is often expressed as a multiple of capacity (C), as shown below:  Poly-quest Cell Type Capacity (nom.)  4C  6C  8C  10C   PQ-0880 0.88A/hr  3.4A  5.1A   6.8A 8.8A   PQ-1500 1.50A/hr.  6.0A  9.0A  12.0A  15.0A   PQ-2600 2.6A/hr  10.4A  15.6A  20.8A  26.0A   PQ-2600 "2P" (5200mAh)  5.2A/hr 20.8A  31.2A  41.6  52.0A

Poly-Quest Battery Packs Please read the manual carefully before using... it can make a difference between having a great time on the flying field or NOT having a great time at the flying field...YOU CHOOSE!!!! Model No. Description Sales Price PQ-300 X 2S1P-HG 300 mAh - 7.4 V, (10c), Super High-Output Lithium Polymer. 2 cell Pack with High-quality 0.5mm Silicone cord. Size = 22 x 48 x 7 mm Weight = 14 g $25.00 PQ-300 X 3S1P-HG 330 mAh - 11.1 V , (10c), Super High-Output Lithium Polymer. 3 cell Pack with High-quality 0.5mm Silicone cord. Size = 22 x 48 x 10 mm Weight = 21 g $33.00 PQ-600 X 2S1P-HG 600 mAh - 7.4 V, (10c), Super High-Output Lithium Polymer. 2 cell Pack with High-quality 0.5mm Silicone cord and JST connector. Size = 22 x 48 x 12 mm Weight = 26g $33.00 PQ-600 X 3S1P-HG 600 mAh - 11.1 V, (10C), Super High-Output Lithium Polymer. 3 cell Pack with High-quality 0.5mm Silicone cord and JST connector. Size = 22 x 48 x 18 mm Weight = 38g $40.00 PQ-880 X 2S1P-SP 880 mAh - 7.2 V, (10C), Super High-Output Lithium Polymer. 2 cell Pack with High-quality 0.5mm Silicone cord and JST connector. Size = 35 x 62 x 8 mm Weight = 39g $31.00 PQ-880 X 3S1P-SP 880 mAh - 11.1 V, (10C), Super High-Output Lithium Polymer. 3 cell Pack with High-quality 0.5mm Silicone cord and JST connector. Size = 35 x 62 x 12 mm Weight = 56g $42.00 PQ-1000N X 2S1P-HG 1000 mAh - 7.4 V, (10C), Super High-Output Lithium Polymer, 2 cell Pack with High-quality 0.5mm Silicone cord and JST connector. Size = 30 x 90 x 8 mm Weight = 40 g $39.00 PQ-1000N X 3S1P-HG 1000 mAh - 11.1 V, (10C), Super High-Output Lithium Polymer, 3 cell Pack with High-quality 0.5mm Silicone cord and JST connector. Size = 30 x 90 x 10 mm Weight = 60g $50.00 PQ-1100 X 2S1P-HG 1100 mAh -7.4 V, (10C), Super High-Output Lithium Polymer, 2 cell Pack with High-quality 0.5mm Silicone cord and JST connector. Size = 35 x 62 x 10 mm Weight = 44g $35.00 PQ-1100 X 3S1P-HG 1100 mAh -11.1 V, (10C), Super High-Output Lithium Polymer, 3 cell Pack with High-quality 0.5mm Silicone cord. Size = 35 x 62 x 15 mm Weight = 66g $45.00 PQ-1500 X 2S1P-HG 1500 mAh -7.2 V, (10C), Super High-Output Lithium Polymer, 2 cell Pack with High-quality 0.5mm Silicone cord. Size = 42 x 69 x 10 mm Weight = 64g $40.00 PQ-1500 X 3S1P-HG 1500 mAh –11.1 V, (10C), Super High-Output Lithium Polymer, 3 cell Pack with High-quality 0.5mm Silicone cord. Size = 42 x 69 x 15 mm Weight = 100g $53.00 PQ-1800N X 2S1P-HG 1800 mAh - 7.4 V, (10C), Super High-Output Lithium Polymer, 2 cell Pack with High-quality 0.5mm Silicone cord. Size = 30 x 90 x 12 mm Weight = 72g $45.00 PQ-1800N X 3S1P-HG 1800 mAh - 11.1.4 V, (10C), Super High-Output Lithium Polymer, 3 cell Pack with High-quality 0.5mm Silicone cord. Size = 30 x 90 x 18 mm Weight = 108g $60.00 PQ-2200 X 2S1P-HG 2200 mAh - 7.2 V, (10C), Super High-Output Lithium Polymer, 2 cell Pack with High-quality 0.5mm Silicone cord. Size = 56 x 90 x 8 mm Weight = 95g $55.00 PQ-2200 X 3S1P-HG 2200 mAh - 11.1 V, (10C), Super High-Output Lithium Polymer, 3 cell Pack with High-quality 0.5mm Silicone cord. Size = 56 x 90 x 12 mm Weight = 138g $70.00 PQ-2600N X 2S1P-HG 2600 mAh - 7.4 V, (12C), Super High-Output Lithium Polymer, 2 cell Pack with High-quality 0.5mm Silicone cord. Size = 38 x 110 x 11 mm Weight = 104 g $64.95 PQ-2600N X 3S1P-HG 2600 mAh -11.1 V, (12C), Super High-Output Lithium Polymer, 3 cell Pack with High-quality 0.5mm Silicone cord. Size = 38 x 110 x 17 mm Weight = 156 g $99.95 PQ-2600N X 4S1P-HG 2600 mAh - 14.8 V, (12C), Super High-Output Lithium Polymer, 4 cell Pack with High-quality 0.5mm Silicone cord. Size = 38 x 110 x 22 mm Weight = 208 g $129.95   Poly-Quest Battery Pack Accessories   Model No. Description Sales Price PQ-2S-PCM 2 Cell Balancer Click Here for more information about the Poly-Quest PCM Guard! $18.00 PQ-3S-PCM 3 Cell Balancer Click Here for more information about the Poly-Quest PCM Guard! $18.00 PQ-4S-PCM 4 Cell Balancer Click Here for more information about the Poly-Quest PCM Guard! $18.00 PQ-5S-PCM 5 Cell Balancer Click Here for more information about the Poly-Quest PCM Guard! $18.00 MPT-Connector-Only Balance connector-{for Battery} $2.50 MPT-2 Connector/JST MPT with 2 JST-Male {for Battery} $12.00 MPT-3 Connector/JST MPT with 3 JST-Male {for Battery} $15.00 MPT-4 Connector/JST MPT with 4 JST-Male {for Battery} $20.00 MPT-5 Connector/JST MPT with 5 JST-Male {for Battery} $24.00

Call ShulmanAviation at (407) 359-1020 today!